Cisco CCIE Routing and Switching Written Set 3

1.

Which of the following events will trigger a log entry to be created with a severity level of 5 if syslog has been enabled on a router? (Select the best answer.)

the Cisco IOS software failing to load a packet being denied by an ACL a router interface transitioning to the down state an invalid packet type being received on an interface

2.

On which interface type is turbo flooding not supported? (Select the best answer.)

ARPAencapsulated Ethernet FDDI HDLCencapsulated Serial Token Ring

3.

What is the default WTD maximum threshold for queue 1? (Select the best answer.)

50 percent 100 percent 200 percent 400 percent

4.

Which of the following features does IGMPv3 support that IGMPv2 does not? (Select the best answer.)

querier elections leave group messages groupspecific queries host membership report suppression multicast source filtering

5.

Which of the following statements is correct regarding ISAKMP preshared keys that are stored in secure type 6 format? (Select the best answer.)

The master key is stored in the router configuration and is encrypted with AES. The master key can be changed after it has been created. Deletion of the master key will unencrypt all of the encrypted passwords. Keys are encrypted as soon as you issue the key configkey password encryption masterkey command.

6.

IP routing is not enabled on a Cisco router that you administer. You want to create a gateway of last resort on the router.
Which of the following commands should you issue to accomplish your goal? (Select the best answer.)

ip route 0.0.0.0 0.0.0.0 s0/0 ip defaultnetwork 10.10.100.0 ip route 0.0.0.0 0.0.0.0 10.10.100.1 ip defaultgateway 10.10.100.1

7.

Which of the following best describes how to create a MAC address that is mapped from a multicast IPv6 address? (Select the best answer.)

Prepend FF to the last five octets of the IPv6 address. Prepend 3333 to the last four octets of the IPv6 address. Prepend FFFF to the last four octets of the IPv6 address. Prepend 0100.0CCC to the last two octets of the IPv6 address. Prepend 0180.C200 to the last two octets of the IPv6 address.

8.

Which of the following best defines an RD? (Select the best answer.)

a value that indicates membership in an RFC 4364 VPN a path that labeled packets take through an MPLS network a value that enables RFC 4364 VPN customers to use overlapping IP address ranges a routing table instance for a VPN

9.

Which of the following statements is correct about external routes received by an NSSA? (Select the best answer.)

External routes from an ASBR are converted to Type 3 LSAs and tunneled through the NSSA to theABR, where they are converted to Type 5 LSAs. External routes from an ASBR are converted to Type 3 LSAs and tunneled through the NSSA to theABR, where they are converted to Type 7 LSAs. External routes from an ASBR are converted to Type 5 LSAs and tunneled through the NSSA to theABR, where they are advertised as Type 5 LSAs. External routes from an ASBR are converted to Type 5 LSAs and tunneled through the NSSA to theABR, where they are converted to Type 7 LSAs. External routes from an ASBR are converted to Type 7 LSAs and tunneled through the NSSA to theABR, where they are converted to Type 5 LSAs.

10.

Which of the following are true of both traffic policing and traffic shaping? (Select 2 choices.)

Both buffer excess traffic. Both remark excess traffic. Both limit bandwidth utilization. Both use a token bucket. Both smooth traffic.

Cisco CCIE Routing and Switching Written Set 3

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Congratulations

COMPANY

Products

OTHERS

Partner

Cisco CCIE Routing and Switching Written Set 3

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Congratulations

Detail Form

COMPANY

Products

OTHERS

Partner