Cisco CCIE Routing and Switching Written Set 13

15 ✘ 17 ✘ 25 ✘ 103 ✔

1 ✘ 2 ✘ 3 ✔

1 ✘ 2 ✘ 3 ✔

FF7 ✘ FF ✘ FF3 ✘ Embedded RP does not use any special IPv6 address. ✔

It will send the join only to the neighbor with the highest IP address. ✘ It will send the join only to the neighbor with the lowest IP address. ✘ It will send the join in a round-robin fashion across all neighbors. ✘ It will send the join to all neighbors. ✔

IPv6 multicast uses Multicast Listener Discovery. ✘ The first 8 bits of an IPv6 multicast address are always FF (1111 1111). ✘ IPv6 multicast requires MSDP. ✘ PIM dense mode is not part of IPv6 multicast. ✔

ff02::39 ✘ ff02::13 ✘ ff02::d ✘ ff02::17 ✔

1011 ✘ 1918 ✘ 2044 ✘ 4601 ✔

to prevent multicast packets from looping ✘ to prevent PIM packets from looping ✘ to instruct PIM where to send a (*, G) or (S, G) join message ✘ to prevent multicast packets from looping and to instruct PIM where to send a (*, G) or (S, G) join message ✔

ip pim ssm ✘ ip pim ssm 232.0.0.0 255.0.0.0 ✘ ip pim ssm range 50 ✘ access-list 50 permit 232.0.0.0 15.255.255.255 ✔ ip pim enable default ✔