Cisco C-Series Servers for Engineer

1.

How many Ethernet ports come standard on all Cisco UCS C-Series Rack-Mount Servers?

one two three four

2.

How does the Cisco extended memory technology offer the most memory in a 2 RU server?

It incorporates the memory available in the Cisco UCS B-Series blades. One virtual DIMM is mapped to four physical DIMMs. Four physically distinct DIMMs are mapped to a single logical DIMM. It offers twice the physical DIMMs found in other 2 RU servers.

3.

A customer has data center needs for memory-intensive applications, including modeling applications. Which Cisco UCS C-Series server best fits this requirement?

Cisco UCS C200 M1 Cisco UCS C210 M1 Cisco UCS C260 M1 Cisco UCS C250 M1

4.

In what way are converged network adapters an integral element of a unified fabric infrastructure?

They simultaneously send TCP/IP communications over multiple 1-Gbps connections. They support the 4-Gbps Fibre Channel connections and use a PCIe interface to connect to the server. They simultaneously send either FCoE or TCP/IP communications over a single 10-Gbps connection. They use multiple integrated ASICs to separately perform 10-Gb Ethernet and Fibre Channel functions.

5.

Which CLI command is used to put network configuration settings into the system configuration?

shutdown restore save commit show

6.

Which command is used to remotely reset the server to its initial power-on state without cycling the power?

power commit power shutdown power hard reset power cycle

7.

How can you verify that the Cisco UCS C-Series server is in standby power mode?

The Power Status LED is blinking green. The Power Status LED is dark. The Power Status LED is green. The Power Status LED is amber.

8.

How is Cisco able to offer networking solutions that operate within the distributed hypervisor layer featuring Cisco VN-Link?

using virtual Ethernet interfaces that are the virtual equivalent of physical network access ports providing a single point of management across the Cisco Unified Computing System solution using the virtual interface card to provide 10-GB Ethernet and FCoE manually provisioning virtual interfaces based on network policies

9.

How do you activate new firmware on the Cisco UCS C-Series server?

It is activated by switching the server to the new firmware after a system reboot. It is activated by reinstalling the server operating system. It is activated when the firmware is installed on the server. It is activated by downloading the desired images from Cisco Connection Online and copying them to anetwork server.

10.

How can you manage operating systems and applications on the Cisco UCS C-Series servers?

using the CIMC by the serial port over the network by SSH or Telnet using the KVM console

Cisco C-Series Servers for Engineer

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Congratulations

COMPANY

Products

OTHERS

Partner

Cisco C-Series Servers for Engineer

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Congratulations

Detail Form

COMPANY

Products

OTHERS

Partner