×
Detail Form
We will send your result on your email id and phone no. please fill detail
1.
During a recent OSPF election among three routers, RTA was elected the DR and RTB was elected the BDR, as seen in the graphic. Assume that RTA fails, and that RTB takes the place of the DR while RTC becomes the
new BDR. What will happen when RTA comes back online?
new BDR. What will happen when RTA comes back online?
2.
The Dev-1 and Dev-3 routers are OSPF neighbors over the Ethernet 0/0 connection. Based on the show ip ospf neighbor output from the Dev-1 and Dev-3 routers, which statement is true?
3.
When other routing protocol routes are being redistributed into OSPF, what is one of the most common problems?
4.
Refer to the diagram. Which OSPF configuration command is required to configure Area 3 as a totally stubby area?
5.
The 192.168.0.0 network is not being propagated throughout the network. Observe the BGP configuration
commands from the advertising router. What is the reason the 192.168.0.0 route is not being advertised?
router bgp 65111
neighbor 172.16.1.1 remote-as 65111
neighbor 172.16.2.1 remote-as 65112
network 192.168.0.0
network 10.0.0.0
!
ip route 192.168.0.0 255.255.0.0 null0
commands from the advertising router. What is the reason the 192.168.0.0 route is not being advertised?
router bgp 65111
neighbor 172.16.1.1 remote-as 65111
neighbor 172.16.2.1 remote-as 65112
network 192.168.0.0
network 10.0.0.0
!
ip route 192.168.0.0 255.255.0.0 null0
6.
Which BGP attribute is used by BGP to prevent routing loops?
7.
Which BGP path attribute is Cisco proprietary?
8.
Which show command will display only the Type 5 LSAs in the OSPF topology database?
9.
Which command will display EIGRP packets sent and received, as well as statistics on hello packets, updates, queries, replies, and acknowledgments?
10.
Which attribute must exist in the BGP update packet?