×
Detail Form
We will send your result on your email id and phone no. please fill detail
1.
What is the maximum round-trip delay that an H-REAP will tolerate from a centralized controller?
2.
Which one of the following integrated services routers supports the integrated 2.4-GHz b/g access points?
3.
Which feature was introduced in Cisco Compatible Extensions version 2?
4.
Controller-based products use X.509 certificates for which of the following?
5.
What is the Cisco-recommended signal-to-noise ratio for a data rate of 54 Mbps on a 2.4-GHz data network?
6.
Which four criteria does the Cisco Unified Wireless IP Phone 7921G use to associate with the access point?
(Choose four.)
(Choose four.)
7.
A customer brings you a previously completed site survey for the initial wireless implementation from 12 months ago. The customer currently has six access points deployed in the warehouse. The survey shows that the
installed coverage provides for a 15-percent overlap between cells at 5.5 Mbps, and a 5-percent overlap at 11 Mbps. This solution has proved to provide adequate coverage and roaming capabilities for the data applications.Why would this site survey not be adequate for a VoIP application?
installed coverage provides for a 15-percent overlap between cells at 5.5 Mbps, and a 5-percent overlap at 11 Mbps. This solution has proved to provide adequate coverage and roaming capabilities for the data applications.Why would this site survey not be adequate for a VoIP application?
8.
What is the Cisco-recommended limit of standalone access points to be managed by a CiscoWorks WLSE 1130-19 with RF management enabled?
9.
What is the Cisco-recommended signal-to-noise ratio for a data rate of 54 Mbps on a 5-GHz data network?
10.
The source port of LWAPP Layer 3 data traffic is UDP port 1024 or greater.
What is the destination port?
What is the destination port?