Cisco AWLANFE Cisco Advanced Wireless LAN for Field Engineers

Using the WLSE, you are trying to push out a configuration job to a standalone access point, but the job does not start. Which of the following would cause this failure?

You want to dynamically assign users to an 802.1Q VLAN as a result of their authentication. In order to
accomplish this, which two IETF RADIUS attributes should you configure on the Cisco Secure ACS? (Choose
two.)

In a deployment using standalone access points, clients set up to authenticate with EAP-PEAP or EAP-Cisco
Wireless (Cisco-LEAP) cannot authenticate. When you inspect the Failed Attempts report on the Cisco Secure ACS, you find this error: "Unknown network access server NAS." Which problem may have caused this failure?

What is the maximum number of hexadecimal characters allowed when configuring the WPA or WPA2 passphrase in Cisco ADU?

A client roams from H-REAP AP1 to H-REAP AP2. The client is unable to associate to H-REAP AP2. H-REAP AP2 has six other clients associated to it, which continue to pass traffic. What has caused this problem?

You are configuring a wireless LAN controller for QoS. Which 802.11e user priority tag should you apply to voice applications?

You are using ADU and are authenticated and associated to an access point.
However, you are unable to obtain an IP address. Which of these has caused this problem?

Which parameter, when enabled on a standalone access point, gives the highest priority to a voice packet even when QoS is not enabled?

You review the Failed Attempts logs on an AAA server and find: "unknown network access server error." Which failure could produce this error?

If it is properly deployed, a controller-based access point is capable of monitoring all VLANs on a network when you select which of the following modes from the AP Mode drop-down menu on the controller?