×
Detail Form
We will send your result on your email id and phone no. please fill detail
1.
Which of the following parameter sets must be configured on the Cisco Wireless Location Appliance?
2.
Static WEP is configured on the access point. You are authenticated and associated to the access point but are unable to obtain an IP address. Which of the following will cause this problem?
3.
Which set of RF characteristics is directly monitored by the core feature set products?
4.
During the installation of the Cisco WCS, an error occurs. Where will the installation log be found?
5.
On a Cisco Aironet 1230 Series autonomous access point, the Status LED is solid red, and the Ethernet and Radio LEDs are both off. What does this indicate?
6.
In the wireless Advanced Feature Set using lightweight access points, a virtual interface is used when supporting which of the following features?
7.
You are using standalone Cisco Aironet 1400 Series Wireless Bridges for a nine-mile point-to-point wireless link between two buildings. Which distance setting should you use for the bridge configured as the root?
8.
The Cisco Lifecycle Services approach for wireless solutions provides a framework for which of the following opportunities?
9.
Which Cisco Aironet Series devices can be powered using 802.3af inline power?
10.
You have just finished aligning a Cisco Aironet 1400 Series Wireless Bridge link using installation mode.
When you set the link back to operational mode you loose association to the root bridge.
Which action will correct the problem?
When you set the link back to operational mode you loose association to the root bridge.
Which action will correct the problem?