×
Detail Form
We will send your result on your email id and phone no. please fill detail
1.
When optimizing a standalone point-to-multipoint bridge installation with eight non-root bridges, which of the following RTS threshold and CWmin settings would be correct for the non-root bridges?
2.
Which service component in the implement phase is typically performed prior to the handover of a wireless solution to the customer's operations organization?
3.
Which parameter, when enabled on a standalone access point, gives the highest priority to a voice packet even when QoS is not enabled?
4.
One of your customers has decided to deploy location-based services in addition to existing wireless services.
The customer requires that the additional access points to be deployed in monitor-only mode. The most likely reason for this requirement is that the customer has which of these existing wireless devices?
The customer requires that the additional access points to be deployed in monitor-only mode. The most likely reason for this requirement is that the customer has which of these existing wireless devices?
5.
Which definition best describes the staff training service component within the wireless implement phase?
6.
Which protocol does the RADIUS server use inside the secure tunnel of EAP-FAST to authenticate the client when one-time passwords are in use?
7.
What is the recommended distance between controller-based access points for support of roaming?
8.
A Cisco 4404 WLAN controller is being connected to a Cisco 6500 Catalyst Series Switch. How would you interconnect and configure LAG for connectivity and ensure redundancy?
9.
How many WLANs can a Cisco Aironet 1242 in H-REAP mode support when actively connected to a wireless controller?
10.
Your customer has deployed a Cisco Wireless Location Appliance within its warehouse environment.
However, employees there have been experiencing problems when tracking objects using active RFID tags.
You use an access point scan to determine if the Location Appliance has been deployed correctly.
Making which change to warehouse deployment location services will most likely correct the problem?
However, employees there have been experiencing problems when tracking objects using active RFID tags.
You use an access point scan to determine if the Location Appliance has been deployed correctly.
Making which change to warehouse deployment location services will most likely correct the problem?