Check Point-Certified Security Expert R71 Update Set 11

You have three Gateways in a mesh community. Each gateway's VPN Domain is their internal network as defined on the Topology tab setting "All IP Addresses behind Gateway based on Topology information." You want to test the route-based VPN, so you created VTIs among the Gateways and created static route entries for the VTIs. However, when you test the VPN, you find out the VPN still go through the regular domain IPsec tunnels instead of the routed VTI tunnels.

Even after configuring central logging on Connectra, Connectra logs are not displaying in SmartView Tracker. What could be the cause of this problem?

How many IPS Events can be shown at one time in the Event preview pane?

What cluster mode is represented in this case? 1 (local) 172.168.1.1 100% active 2 172.168.1.2 0% standby 125

For best performance in Event Correlation, you should use:

If SmartWorkflow is configured to work without Sessions or Role Segregation, how does the SmartDashboard function?

Which Check Point QoS feature marks the ToS byte in the IP header?

When configuring a Web Application for SSL VPN remote access, you have given the following definition for the application along with its protection level.

You need to verify the effectiveness of your IPS configuration for your Web server farm. You have a colleague run penetration tests to confirm that the Web servers are secure against traffic hijacks. Of the following, which would be the best configuration to protect from a traffic hijack attempt?

URL Filtering Policy can make exceptions for specific sites by being enforced...