×
Detail Form
We will send your result on your email id and phone no. please fill detail
1.
You are required to deploy servers with a single adapter that are attached to your Brocade VCS Fabric to communicate with FC SAN attached storage.
What is required?
2.
You have configured your Brocade VCS Fabric to connect to a third-party switch using multiple links from two RBridges in your fabric. From the fabric, you
configure a static vLAG for these links. You then receive complaints about network performance and notice a significant CPU load on the third-party switch.
What is the problem?
3.
You have two Brocade VDX 6740 switches with cables connected in ports 15-18 and ports 31- 34 in each switch to form ISLs between them.
How many trunks will form?
4.
Which switch is capable of running in stand-alone mode?
5.
You are introducing a Brocade VCS Fabric to your network and would like to implement Fibre Channel using the same switch.
Which switch would you use?
6.
You are introducing a Brocade VCS Fabric to your network and want to implement a non- modular, top of rack switch with at least 40 GbE uplinks to the core.
Which switch would you use?
7.
A customer has a problem forming a Brocade VCS Fabric using 10 GbE, SFP+ passive, Twinax cables.
What should the customer do to resolve this problem?
8.
A QSFP transceiver in breakout mode consists of how many 10 GbE ports?
9.
A Brocade VDX 6730 is added to an existing three node Brocade VCS Fabric running NOS 4.1. You want to manage all switches in the fabric from the principal
switch.
What should you do to accomplish this task?
10.
A principal RBridge fails.
What happens to the VCS virtual IP address?