×
Detail Form
We will send your result on your email id and phone no. please fill detail
1.
A customer has implemented an ERS 8000 solution and deployed the configuration and Orchestration Manager (COM). Which tool from within COM is used to set up and manage spanning tree groups?
2.
When configuring Single Link Trunking (SLT) or Split Multi-Link Trunking (SMLT), what can be done to facilitate easily adding more VLANs to the network without impacting traffic?
3.
An existing enterprise network is using Ethernet Routing Switch (ERS) 8600 switches in the campus core. It
has been determined that 10 Gigabit links are required to replace the existing 1 gigabit uplinks will affect is
connections on each of the ERS 8600 switches. Which statement describes how to accomplish this
requirement in each ERS 8600 chassis?
4.
RSMLT Edge is enabled globally on two ERS 8800 switches. After recovering from a power outage some clients cannot communicate. A technician determined that only one of the core switches has recovered. What should the technician check to ensure that this loss of communication does not occur in the event of a future power outage or other failure?
5.
Which set of procedures will upgrade the boot monitor on an Ethernet Routing Switch (ERS) 8600 with a single 8692SF module?
6.
The ERS 8000 backplane hosts an EEPROM for storage of up to 4096 MAC addresses. The MAC
addresses are automatically used up as they are assigned to which three of the following?
7.
The Ethernet Routing Switch (ERS) 8600 supports the feature IP VPN-Lite that does not require the use of an MPLS network. Which function does the ERS 8600 as a Provider Edge (PE) perform for IP VPN-Lite?'
8.
A customer is upgrading an existing ERS 8610 with the 8692SF to software version 7.x. Which statement regarding the upgrade is correct?
9.
A technician discovers that an Ethernet Routing Switch (ERS) 8300 cat5e copper link is intermittent. The link connects a distant workstation to 8348GTX port 6/2. The cable path is undetermined at this point and it
is suspected to traverse many patch panels. How can the ERS 8300 Time Domain reflectometer tool be of
help in this situation?
is suspected to traverse many patch panels. How can the ERS 8300 Time Domain reflectometer tool be of
help in this situation?
10.
Traceout allows a route to be traced to a network using an Ethernet Routing Switch (ERS) 8600 CLI command. In the command output, the possible range of `w' values is 1-255. The `w' value represents wait time for what?