Avaya Communication Server 1000 for Avaya Aura Maintenance - 7004

The Satellite Link Control feature ensures that the configuration of a call does not include more than one communications satellite trunk. Tandem trunk calls, when connected through more than one communication satellite trunk, are subject to transmission distortion due to propagation. Which parameters are required to be equipped or configured for Satellite Link Control in the Communication Server 1000?

The Directory Number range for a customer dialing plan is 2500-2599. Which entry indicates the number of digitals of the CDP Dialed Number (NCDP) for this dialing plan?

Your customer has a Communication Server 1000 RIs. 7 x system equipped with System Errors and Events Lookup pack 245 that provides the ability to display system messages on screen. When a system message in received, which procedure should you use to look it up and display it on the screen?

In order to set up the Customer Data Block within Element Manager to support Zone Based Dialing, and assuming Package 420 ZBD Package is installed and active, what needs to be done first?

Which IP Peer Networking component provides the centralized call routing for Communication Server 1000 systems in an Avaya Aura network solution?

When attempting to program Zone Based Dialing through Element Manager, the user is unable to access the Dialing Configuration Page. What needs to be configured before the Dialing Configuration Page can be accessed, assuming the ZBN_PACKAGE (420) is already installed?

You are configuring a bandwidth management zone on a Communication Server 1000 RIs. 7 x Call Server. The Call Server zones will be used for interface communications between endpoints (IP telephones and gateways). Which is the preferred bandwidth management strategy, assuming the network has adequate bandwidth?

A customer has deployed a Communication Server (CS) 1000 RIs. 7 x system at their site. They have asked you if the CS 1000 has a feature that can extend and ring calls to other locations. You have decided that Personal Call Assistant (PCA) will meet the customer's requirements and verified that the system is equipped with Package 398, and that it has sufficient ISM parameters. Which step must be performed first when implementing PCA?

In order for Zone Based Dialing On-Net Call routing (Inter-site) to be used, users are required to dial an E.164 number (either International or National number), for calls between sites. For this to be true, and for the system to pass the proper Calling Line ID (CLID), which prompt must be configured?

Which functionality do TIE trunks provide?