Avaya-Avaya Ethernet Routing Switch Implementation and Maintenance Exam 2 Set 1

1.

Which feature can be used on a Split Multi Link Trunking (SMLT) with a Sod Down option?

Extended control packet limit (ext-CP) Discard untagged frames Simple Loop Prevention Protocol (SLPP) Virtual Link Aggregation Protocol (VLACP)

2.

Fn Ethernet Routing Switch (ERS) 8300 configurations, which service class ensures that protocol updates such as RIP and OSPF are able to get out of a heavily congested switch?

Bronze Standard Network Control Premium Control

3.

What is a characteristic of Routed Split Multi-Link Trunking (RSMLT) configuration?

RSMLT is only configured on edge SMLT connections. RSMLT uses priority values to distinguish between the primary and backup routers RSMLT routers are implemented with Virtual Routing Forwarding (VRF)-Lite routers RSMLT is always used in conjunction with routing protocols and SMLT connections.

4.

An Information Technology organization needs to determine whether they should upgrade their existing Routing Switch (ERS) 8600 switches to release 5.0. Each chassis currently has both 8648GTR 8648TX modules. One of the features that the company requires is the ability to perform port mirroring on multiple ports per module at a time. What should be done to meet their port mirroring requirement when upgrading to software release 5.0?

Replace the existing modules with 8648GTRS modules, Upgrade to ERS 8600 Release 5.0 without any hardware upgrade. Replace the existing 8648TX modules with ERS 8648TXE for egress mirroring. Recommend other means to capturing traffic.

5.

Which statement describes specific mechanism available for managing the switch using common of IP address regardless of which CPU is the Primary?

The net gmt port can be assigned a virtual address for management access. Virtual Router Redundancy Protocol (VRRP) provides a virtual IP address. Routed Split Multi-Link Trunk Edge (RSMLT-Edge) provides access The Virtual Routing Forwarding (VRF) feature includes a Circuitless IP address.

6.

An Ethernet Routing Switch (ERS) 8600 is being configured for Virtual Router Redundancy Protocol (VRRP). If the default value is used on the peer switch, which CLI command would cause this switch to be the VRRP master?

Config vlan 100 ip vrrp 100 priority 250 Config vlan 100 ip vrrp 100 priority 1 Config vlan 100 ip vrrp 100 master Config vlan 100 ip vrrp 100 priority master

7.

For a Converged Campus network, which configuration change is recommended for the default VLAN (VLAN 1)?

Assign an IP address to the default VLAN for switch management. Remove the default VLAN from active ports. Configure QoS on the default VUW to support voice traffic. Remove spanning tree from the default VLAN.

8.

A campus network requirement is to introduce Virtual Routing and Forwarding (VRF) in the existing Ethernet Routing Switch (ERS) 8600-based core. The technician has to configure VRF on the ERS 8600. Which statement represents the order for configuring a new VRF?

Create a new VLAN, add an IP address, create a VRF, and move the VLAN to the new VRI Create a VRF, add an IP address, create a new VLAN, and move the VLAN to the new VRF Create a VRF, create a new VLAN, add an IP address, and move the VLAN to the new VRF Create a VRF, create a new VLAN move the VLAN to the new VRF, and add an IP address

9.

A technician is configuring an InterSwitch Trunk (IST) for Split Multi-Link Trunking (SMLT). Which statement about how the 1ST is addressed is true?

Configure the IP address of the ports that comprise the 1ST. No address configurations are required when configuring an 1ST. Configure the IP address of the VLAN that was created for the 1ST. Configure the MAC addresses of the switches on each end of the 1ST.

10.

An existing enterprise network is using Ethernet Routing Switch (ERS) 8600 switches in the campus core. It has determined that 10 Gigabit links are required to replace the existing 1 Gigabit links 1 to the closest. This will affect 18 connections on each of the ERS 8600 switches. Which statement describes how to accomplish this requirement in each ERS 8600 chassis?

Replace the two existing switch fabric modules with 8394SF systems. Replace the two existing switch fabric modules with 8692SF and Supermezz. Replace the two existing 8616SXE modules with 8612XLRS modules. Replace the six 8683XLR modules with 8612XLRS.

Avaya-Avaya Ethernet Routing Switch Implementation and Maintenance Exam 2 Set 1

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Congratulations

COMPANY

Products

OTHERS

Partner

Avaya-Avaya Ethernet Routing Switch Implementation and Maintenance Exam 2 Set 1

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Congratulations

Detail Form

COMPANY

Products

OTHERS

Partner