ALCATEL LUCENT - Services Architecture

1.

Fragmentation is supported on a Layer 2 service

1

2.

Which of the following commands is used in an RSVP signaled MPLS tunnel to validate the path MTU based on signaling across the LSP?

Path MTU is always calculated from the MTU of the egress network port on the head end PE. oam sdp-mtu adspec cspf

3.

Which of the following best describes how the path-mlu is chosen for an SDP?

An SDP does not have a path-mtu The path-mtu must be set by the administrator. By default, the path-mtu is calculated automatically from the network port MTU of the PE router. The path-mtu is calculated based on the service MTU of the service using the SDP.

4.

Which of the following statements is TRUE concerning route distinguishes on the 7750 SR?

All of the above statements are false. Route distinguishes are appended to IPv4 prefixes to form 16 byte VPN-IFV1 prefixes. Route distinguishes are used to determine which routes a VPRN should import. CE routes must be configured with the proper route distinguishes for the VPRN they are associated to

5.

Which of the following statements is TRUE regarding a VRF?

A VRF contains a single VPRN routes. Every VRF in a PE is associated with one or more route target attributes. Each VPRN needs a separate VRF in each PE router. All of the above statements are true.

6.

Which of the following statements is TRUE concerning the advertisement of VRF routes on a 7750 SR?

By default, a 7750 SR does not advertise all routes in the VRF to a CE router. The default 7750 SR behavior describes all routes in a VRF that are advertised to other PE routers. By default, a 7750 SR does not advertise all routes in the VRF to other PE routers. By default, a 7750 SR advertises all routes in the VRF to a CE router.

7.

Which of the following is NOT a service offered on the Alcatel-Lucent 7750 SR?

IES VPWS VPLS L2TP

8.

Which of the following best describes a VPRN?

Layer 3 direct Internet access service. Layer 2 point-to-point service. Layer 2 multipoint-to-multipoint service. Layer 3 IP multipoint-to-multipoint VPN service.

9.

Which of the following describes a service on the Alcatel-Lucent 7750 SR?

A logical entity that provides a uniform, end-to-end configuration, management and billing model for provisioning either Internet or VPN connectivity. Provides connectivity between customer access points. A service that can either be local or distributed. All of the above

10.

Once a service has been created with a customer association, it is possible to change the customer association.

1

ALCATEL LUCENT - Services Architecture

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Congratulations

COMPANY

Products

OTHERS

Partner

ALCATEL LUCENT - Services Architecture

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Answer & Solution

Answer: Option B

Solution:

Congratulations

Detail Form

COMPANY

Products

OTHERS

Partner