ALCATEL LUCENT - Services Architecture Set 2

SDPs are a logical way to direct traffic from one router to another. SDPs are a logical way to direct traffic between services. SDP IDs are locally unique. SDP IDs must be unique across the network. SDPs are specific to one service type

1 ✘

config>service# epipe service-id enable

✘

config>service# vpws service-id enable

✘

config>service# service-id no shutdown

✘

config>service# epipe service-id no shutdown

✔

1 ✘

configure router sdp sdp-id ✘ configure service sdp sdp-id create ✘ configure service mpls sdp sdp-id create ✘ configure service gre sdp sdp-id create ✔ configure service sdp sdp-id mpls create ✔

configure epipe service-id customer customer-id create ✘ configure service epipe service-id customer customer-id create ✘ configure epipe service-id create ✘ configure epipe service-id customer customer-id create ✔

configure router tunnel ✘ configure router gre ✘ configure router rsvp-te ✘ configure router mpls ✔

LDP must be enabled on both PE routers. RSVP must be enabled on both PE routers. Traffic engineering must be enabled in the IGP. The VC-ID must match between the two PE routers in both directions. The transport tunnel must be operationally up between the two PE routers in both directions.

1 ✘

The vc-id on the spoke-sdp must be explicitly configured. The vc-id on the mesh-sdp must be explicitly configured. The vc-id on the spoke-sdp can be configured to match the service id. The vc-id on the mesh-sdp can be configured to match the service id. The vc-id on the spoke-sdp does not have to be explicitly configured and will use the service id.